Saltar al contenido principal
Pregunta Cerrada

iPhone 5 wont boot after connecting front facing camera cables.

So I had to take my phone apart so that I could replace the broken screen with a new one. After doing so, I tested to see if the screen worked just by connecting the 2 flex cables on the new screen/digitizer and the phone booted up just fine. After connecting the front facing camera and the ear speaker, the phone was not able to boot and a message of white text came up on a black screen. Ive searched all over google for this problem but I cant find anything, does anyone seem to know what the problem is here?

Thank you in advance.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
1 comentario

Still no luck. Should I order a new front speaker or ear speaker?

- de

Agregar un comentario

3 Respuestas

Respuesta Más Útil

The front facing camera cables are not properly installed, something gets shorted and factory NAND test is triggered. reinstall the cables on the screen assembly and try again

Fue útil esta respuesta?

Puntuación 1

2 comentarios:

Ive tried it many times already, can it be something wrong with the Speaker that it wont boot?

- de

Speakers do not connect to any buses, it has to be the sensor.

- de

Agregar un comentario

This happened to me too. Any fixes yet?

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario

Ok. I figured It out. .. it means your front camera is bad. You just need a new one.

Fue útil esta respuesta?

Puntuación 0
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 2

Todo El Tiempo: 479