Saltar al contenido principal

Una cámara de 6 megapíxeles de la serie Lumix de Panasonic lanzada en 2006.

Preguntas 5 Ver todo

What tools are required to dismantle it?

Hi

I was trying to dismantle this camera on the weekend to clean the sensor.

I was going well, managed to remove all the minute Phillips head screws and got the back off. Then I came unstuck. There were 3 really small Torx screws holding the sensor cover on. My smallest Torx driver is in a kit I brought from you for Mac repairs, it is a size 6. Any idea what size these in the camera may be? And do you have a kit with the smaller size Torx drivers?

Thank you

Keith

PS It is a fantastic camera but obviously has dust/pollen on the sensor as there are "splodges" on the screen and on photos that move around.

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 1
1 comentario

I was looking at toolkits the other day and could only find one with drivers down to Torx5. Today I looked again and found one down to 4. The question is, will 4 be small enough? Anyone with any experience with these cameras?

- de

Agregar un comentario

1 Respuesta

Solución Elegida

Keith, the service manual lists it as a Torx 3, and for availability on ifixit, contact them directly at http://www.ifixit.com/Info/contact

Fue útil esta respuesta?

Puntuación 1
Agregar un comentario

Añadir tu respuesta

Keith estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 8

Todo El Tiempo: 1,069