Saltar al contenido principal

Segunda generación de iPhone. Modelo A1241 / 8 o 16 GB de capacidad / plástico negro o blanco de nuevo. La reparación es más sencilla que el primer iPhone. Requiere destornilladores, curvas y herramientas de succión.

Preguntas 1169 Ver todo

sim reader is screwed

hi

i just encountered this site and u guys are doing a fabulous job.

i have an issue with my iphone from past 3 months.

i did not used it because i dont know how to fix the p[roblem.

the problem is that one of the strings in the sim reader is displaced from its actual position. when i insert sim tray the bottom part is broken and was struck in there. i can see the metalic part of the reader through the vent.

i think replacing sim tray will resolve the issue but i cant find a tutorial to replace it.

i really appreciate if some one could post a tutorial for fixing this.

Contesta esta pregunta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 2
Agregar un comentario

2 Respuestas

Respuesta Más Útil

well, have a look at the teardown - it should help.

at http://s1.guide-images.ifixit.com/igi/ZC... you see the mainboard with the sim holder - should be fixable if the original contacts are still ok, but you my not be able to remove the sim card depending on your fix.

Fue útil esta respuesta?

Puntuación 2
Agregar un comentario

The sim card does not activate when I put the sim card in the phone. I have replaced the tray with a new one but it still does not read it? Can you help me?

Otis Hughes

812-655-1881

Fue útil esta respuesta?

Puntuación 0

1 comentario:

My note 2 is doing same thing n it was working just fine, then i switched sim cards n now it wont read sim, help plzzz if u know how??

- de

Agregar un comentario

Añadir tu respuesta

umesh estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 7

Todo El Tiempo: 2,889