Saltar al contenido principal

Model A1225 / Mid 2007 and Early 2008 / 2.4, 2.8, or 3.06 GHz Core 2 Duo processor

Preguntas 491 Ver todo

First three LED lit but nothing shows on the LCD?

I've replaced the HD and one memory chip 2GB for a 4GB now nothing powers up except the DVD disk drive.

I cannot hear the HD even begin to power up and spin even though the power seems to indicate there is a 3rd LED diagnostic bulb lit. Any ideas as to how to proceed?

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 1
Agregar un comentario

1 Respuesta

Solución Elegida

I think you'll need to open your system up again and check your connections.

Did you have a hard time disconnecting any of the cables? you could have damaged LDVS cable or connector on the logic board.

Fue útil esta respuesta?

Calificación 1


No the connectors seemed to come right off - I dicsconnected the HD and the comp did not even acknowledge being void of memory with a ? mark


Agregar un comentario

Añadir tu respuesta

rsensei99 estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 225