iPhone 4 Middle Frame Replacement

Question

iPhone 4

iPhone de cuarta generación. La reparación es sencilla, pero el cristal frontal y la pantalla LCD deben ser reemplazados como una unidad. GSM / 8, 16, o 32 GB de capacidad / Modelo A1332 / Blanco y Negro.

Preguntas 2397 Ver todo

Ricardo @ricardo84337

Rep: 5

2

3

Publicado: 9 de may. de 2013

Opciones

iPhone 4 Middle Frame Replacement

Hey

Hope you can help me here.

Today i've replace an iPhone 4 Middle frame to a new one middle frame.

This is not the first time i do that , but this time , when i was assembling the iPhone i noticed the Buzzer was making a lot o pressure under the front screen and the then the home button stoped to click ( but still working perfect ) , I removed the buzzer and the home comes working perfect again , so the buzzer fit pressure is limiting the Home Button movement . What can it be ?

Hope you can help me please

Regards

Ricardo

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No

Puntuación -1

Agregar un comentario

3 Respuestas

Solución Elegida

Dan @dan24850

Rep: 287

6

2

Publicado: 10 de may. de 2013

Opciones

The vibrate motor is at the top right-hand corner of the iPhone frame (when looking at the back of the iPhone). It is secured by 2 screws which hold the two springy connectors down on the pads of the volume button/headphone jack flex assembly. This has NO impact on your home button under any circumstance. The home button connects to the charging dock connector, which connects directly to the motherboard. Your issue does not make sense. Is there any other information you can provide to help us answer your question?

Fue útil esta respuesta?

Sí No

Puntuación 0

Agregar un comentario