Saltar al contenido principal

How to take out back glass parts

On iPhone5 how is possible to remove the glass parts on top and bottom? are they glued?

Contestado! View the answer Yo también tengo este problema

Es esta una buena pregunta?

Calificación 0
Agregar un comentario

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

Kits de Reparación de Batería de iPhone

Sólo $29.99

Buy Now

2 Respuestas

Solución Elegida

Yup, they're glued in place. Apple used some pretty serious adhesive to hold them in, but it's nothing that a heat gun wont soften. Picking them out from the back is not possible, so you have to heat them up then push them out from the inside. The main problem with removing them is that you have to remove just about every other component in the iPhone to get to them, which is a real pain.

Fue útil esta respuesta?

Calificación 2
Agregar un comentario

Heard anything to the effect of using a form of glass chip repair to fill in a cracked/chipped glas back panel on iphone 5?

Similiar to how a chip is repaired on the windshields on cars and trucks these days. Basically a form of epoxy and on quarter size chips and smaller a suction cup style plunger combination is used to inject the epoxy into the cracks.

Fue útil esta respuesta?

Calificación 1
Agregar un comentario

Añadir tu respuesta

Raselatos estará eternamente agradecido.
Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 4

Todo El Tiempo: 2,231