Repara tus cosas Comunidad Tienda

iPhone de cuarta generación. La reparación es sencilla, pero el cristal frontal y la pantalla LCD deben ser reemplazados como una unidad. GSM / 8, 16, o 32 GB de capacidad / Modelo A1332 / Blanco y Negro.

Preguntas 2397 Ver todo
Pregunta Cerrada

Opciones

iPhone 4 keep rebooting after screen replacement

I have a big problem, i replace my broken screen and now my iPhone 4 don't have signal (no service) AND keeps rebooting after 2 minutes.

2 things: i can't "reconect" the lower antenna connector to the logic board (dont fit in the socket) (image)

and i dont turn off mi iphone when i was changing the battery the first time (i read that this could be the problem) also my clock restart to 1969.

thanks for the help and sorry for my bad english.

Milton

Update

EDIT: i reconnect the antenna connector after a few attempts and now mi I4 charges properly and dont reboot any more BUT i have "no service" and sometimes 1 bar of signal, and in my home 3/4 bars (normal to me). i need help with this, thanks :D

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Sí No
Puntuación 0
Agregar un comentario

2 Respuestas

Filtrar por:
Mas Útiles Más Reciente Más antiguo
Solución Elegida

Opciones

We can't see the picture. The date/time thing is just a small ios 6 bug.

You biggest problem is you cant connect the antenna connector. As long as you dont fix that the problem wil be the same.

The rebooting could be a battery problem, or just software. Did you try restore?

Fue útil esta respuesta?

Sí No
Puntuación 1

1 comentario:

i cant connect the antenna connector, how can i do that? i dont want to damage the logic board, now it restart in 5 seconds, before that yesterday i restore to the 6.0 ios and still keeps rebooting, what can i do? thanks

- de

Agregar un comentario

Opciones

I had the same issue it would not boot, just keep restarting its self, just display apple sign then 5 sec later just turn off....

I dont know if it was because of shier luck but here is what i did

Plugged phone into PC, Apple sign appeared

Removed phone from pc then Held Power on for 3 secs

While holding power button held Home button in for 10 secs

Then release power button still holding in home for 10 secs more..

then phone turned on and stayed on.... i have signal and all functions seem to be working fine... hope this helps someone out there

Fue útil esta respuesta?

Sí No
Puntuación 1
Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 2

Todo El Tiempo: 4,255