Saltar al contenido principal

Procesador de doble núcleo de 1,6 o 1,8 GHz, 2 GB o 4 GB de SDRAM, SSD de 64 GB o 128 GB

Preguntas 192 Ver todo
Pregunta Cerrada

I need help with trackpad reassembly

A huge glass of hot, sugary tea was spilled on the keyboard of our Mac book Air 11.6" computer. It ran pretty well, we frantically blow dried it, etc. After that: *de nada*! I took it apart & carefully dried everything. Stunningly, it started up this morning. The problem: everything works but the keyboard & track pad. The news is mainly good: a USB mouse gave me access to everything, except the ability to type. So, I took it back apart. I found instructions online for just about everything. However, there is a cable that connects to the track pad--it has a blue end and appears to have tiny little copper connectors in it. My question/problem: I can't figure out to what on the track pad I should connect it, or how. It is NOT the cable that connects the track pad to the logic board. I seriously need to know, from anyone who can tell me, what this thing is and how I can ensure that it is properly connected. Thanks in advance for your help!

Sara

Contestado! Ver respuesta Yo también tengo este problema

Es esta una buena pregunta?

Puntuación 0
Agregar un comentario

1 Respuesta

Solución Elegida

ZIF connectors use cam locks. without good lighting and a magnifier it can be almost impossible to realize/find the cam flap. Study these images and directions. The lock must be loose (open) up for the cable to slide in... then pushed down to close.

If this answer was helpful please remember to return and mark it Accepted.

Fue útil esta respuesta?

Puntuación 1

2 comentarios:

Y.W. not many people bother to say "thanks"... Your parents taught you right =8^)

- de

Agregar un comentario
Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 377