Versión actual por: RaRom

Título:

Trying in install a new SSD

Texto:

Hi,

I have an MacBook Air 13" Early 2015, A1466 EMC2925

I installed a PCIe Gen3 x 4 / 3D NAND Flash for Mac SSD (6+12Pin), but it is not seen.

What did I wrong?

I have updated Mojave on the original drive before (firmware 489....), then replaced this with the new SSD.

When booting in Recoverymode, then use the diskutil, it is NOT listed.

SMC reset and NVRAM reset also done.

I have no idea what to do .... maybe you can help me.

Thx

Dispositivo:

MacBook Air 13" Early 2015

Estatus:

open

Respuesta Aceptada:

Editado por: Dan

Título:

Texto:

Hi,

I have an MacBook Air 13" Early 2015, A1466 EMC2925

I installed a PCIe Gen3 x 4 / 3D NAND Flash for Mac SSD (6+12Pin), but it is not seen.

What did I wrong?

I have updated Mojave on the original drive before (firmware 489....), then replaced this with the new SSD.

When booting in Recoverymode, then use the diskutil, it is NOT listed.

SMC reset and NVRAM reset also done.

I have no idea what to do .... maybe you can help me.

Thx

Dispositivo:

Estatus:

open

Aporte original por: RaRom

Título:

No Title (You should edit this question)

Texto:

Hi,

I have an MacBook Air 13" Early 2015, A1466 EMC2925

I installed a PCIe Gen3 x 4 / 3D NAND Flash for Mac SSD (6+12Pin), but it is not seen.

What did I wrong?

I have updated Mojave on the original drive before (firmware 489....), then replaced this with the new SSD.

When booting in Recoverymode, then use the diskutil, it is NOT listed.

SMC reset and NVRAM reset also done.

I have no idea what to do .... maybe you can help me.

Thx

Dispositivo:

No Device

Estatus:

open