Introducción

Use this guide to remove your Shuffle's logic board assembly. The logic board assembly includes the logic board, headphone jack, and battery.

Before beginning, be sure your Shuffle is turned off as shown.
  • Before beginning, be sure your Shuffle is turned off as shown.

Agregar Comentario

Use the edge of an iPod opening tool to pry the plastic cover off the headphone jack side of the Shuffle. Remove the plastic cover and set it aside.
  • Use the edge of an iPod opening tool to pry the plastic cover off the headphone jack side of the Shuffle.

  • Remove the plastic cover and set it aside.

Agregar Comentario

Remove the two Phillips screws from the headphone jack side of the Shuffle.
  • Remove the two Phillips screws from the headphone jack side of the Shuffle.

Agregar Comentario

Use the edge of an iPod opening tool to remove the steel cover from the headphone jack side of the Shuffle. Use the edge of an iPod opening tool to remove the steel cover from the headphone jack side of the Shuffle.
  • Use the edge of an iPod opening tool to remove the steel cover from the headphone jack side of the Shuffle.

Agregar Comentario

Kits de Mac RAM
Acelera tu Mac. Maximiza su memoria.
Kits de Mac RAM
Obtén más memoria para tu Mac.
Use the edge of an iPod opening tool to pry the plastic cover off the controls side of the Shuffle. Remove the plastic cover and set it aside.
  • Use the edge of an iPod opening tool to pry the plastic cover off the controls side of the Shuffle.

  • Remove the plastic cover and set it aside.

The On-Off switch here is turn around. Usually it is green when the iPod is turned on.

Nils Kober - Contestar

Use a pair of tweezers to remove the hold and shuffle sliders from the Shuffle. Use a pair of tweezers to remove the hold and shuffle sliders from the Shuffle.
  • Use a pair of tweezers to remove the hold and shuffle sliders from the Shuffle.

Thanks for this great instruction. Little note: Not important for the function, but contrary to the images the green side of the on/off-slider originally must point in the opposite (inner) direction.

Martin - Contestar

Remove the two Phillips screws on the controls side of the Shuffle.
  • Remove the two Phillips screws on the controls side of the Shuffle.

Agregar Comentario

Use the edge of an iPod opening tool to remove the steel plate from the controls side of the Shuffle. Use the edge of an iPod opening tool to remove the steel plate from the controls side of the Shuffle.
  • Use the edge of an iPod opening tool to remove the steel plate from the controls side of the Shuffle.

Agregar Comentario

Use the edge of an iPod opening tool to slightly pry the steel plate on the headphone jack side of the Shuffle away from the lip cut into the outer case.
  • Use the edge of an iPod opening tool to slightly pry the steel plate on the headphone jack side of the Shuffle away from the lip cut into the outer case.

Agregar Comentario

Use your iPod opening tool to push the logic board assembly out of the outer case enough to grab the logic board by its edges. Pull the logic board assembly out of the outer case.
  • Use your iPod opening tool to push the logic board assembly out of the outer case enough to grab the logic board by its edges.

  • Pull the logic board assembly out of the outer case.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

19 personas más completaron esta guía.

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 12

Últimos 30 Días: 44

Todo El Tiempo: 16,075