Saltar al contenido principal

Vtech Emil the Panda

Qué necesitas

  1. Vtech Emil the Panda, Vtech Emil the Panda: paso 1, imagen 1 de 3 Vtech Emil the Panda, Vtech Emil the Panda: paso 1, imagen 2 de 3 Vtech Emil the Panda, Vtech Emil the Panda: paso 1, imagen 3 de 3
    • First you must detach thes round yellow plugs which cover the screws.

    • There are 6 short screws around the "display"

    • ...and two longer screws under that "display"

  2. Vtech Emil the Panda: paso 2, imagen 1 de 1
    • Here a view of these screws

  3. Vtech Emil the Panda: paso 3, imagen 1 de 3 Vtech Emil the Panda: paso 3, imagen 2 de 3 Vtech Emil the Panda: paso 3, imagen 3 de 3
    • Now just pull it to open.

    • Down there is a spring and a plastic part, look at the pictures

  4. Vtech Emil the Panda: paso 4, imagen 1 de 3 Vtech Emil the Panda: paso 4, imagen 2 de 3 Vtech Emil the Panda: paso 4, imagen 3 de 3
    • There you have these contact springs.

  5. Vtech Emil the Panda: paso 5, imagen 1 de 2 Vtech Emil the Panda: paso 5, imagen 2 de 2
    • The springs are deoxidized with a electronics-cleaner-spray.

    • After reassembling, Emil nnow knows every card and can talk and sing.

    • Done. :)

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Schwarzstein

Miembro Desde 07/15/13

2,813 Reputación

13 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 8

Ultimos 30 días: 13

Todo El Tiempo: 689