Repara tus cosas Comunidad Tienda

PowerBook G4 Titanium Mercury Airport Card Replacement

Introducción

Install an original Airport 802.11b card internally.

Qué necesitas

    • Turn the G4 over.

    • Remove the eight Phillips screws from the lower case.

    Traducir

  2. PowerBook G4 Titanium Mercury Airport Card Replacement: paso 2, imagen 1 de 1

    • Using your thumbs, slide the lower case away from you.

    • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

    • Lift the lower case off.

    Traducir

  4. PowerBook G4 Titanium Mercury Airport Card Replacement: paso 3, imagen 1 de 1

    • Your laptop should look approximately like this.

    Traducir

  5. PowerBook G4 Titanium Mercury Airport Card Replacement, Airport Card: paso 4, imagen 1 de 1

    • Skip this step if your computer does not have an Airport card.

    • Firmly grasp the plastic tab attached to the Airport card and pull up and to the left.

    • Disconnect the antenna cable from the left side of the Airport card.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Documentos Adjuntos

Autor

con 1 otro colaborador

iRobot

Miembro Desde 09/24/09

1 Reputación

636 Guías creadas

Insignias: 36

+ 33 más insignias

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 3

Ultimos 30 días: 15

Todo El Tiempo: 13,241