Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 25 guías que incluyen este paso.
Traduciendo paso 5
Paso 5
-
Use the flat end of a spudger to press and hold the small gold 'battery disconnect' button.
-
If the power LED is lit up, continue holding the button until the LED goes dark, and then release. This may take up to 10 seconds.
-
If the LED does not light, release the button after 5-10 seconds. Press and hold it again for 5-10 seconds, and release. Finally, press and hold it a third time for 5-10 seconds, and release.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.