Saltar al contenido principal

MacBook Pro 17" Unibody Display Replacement

Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 11 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 13

Paso 13
MacBook Pro 17" Unibody Display Replacement: paso 0, imagen 1 de 3 MacBook Pro 17" Unibody Display Replacement: paso 0, imagen 2 de 3 MacBook Pro 17" Unibody Display Replacement: paso 0, imagen 3 de 3
  • Grab the upper case with your right hand and rotate it slightly toward the top of the display so the upper display bracket clears the edge of the upper case.

  • Rotate the display slightly away from the upper case.

  • Lift the display up and away from the upper case, minding any brackets or cables that may get caught.

  • During reassembly, fit the display into place and install the display bracket Torx screws, then close the lid and lay the laptop upside-down to check the alignment of the screen to the body. If necessary, loosen the screws and realign the display before tightening.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.