Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.
Traduciendo paso 5
Paso 5
-
Insert the flat end of a spudger between the SATA data cable and the edge of the hard drive.
-
Twist the spudger to separate the SATA data cable from the hard drive.
-
Disconnect the SATA data cable from the hard drive.
-
Lift the hard drive out of your iMac, minding the thermal sensor cable that may get caught.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.