Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Use the flat end of a spudger to disconnect the front camera flex cable.
-
Use a pair of tweezers to carefully remove the front facing camera. Be careful to only grip the body of the camera, as the top is the sensor pcb and is only held on with glue (removal will ruin the sensor).
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.