Repara tus cosas Comunidad Tienda

LG V20 Frontkamera austauschen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 7 guías que incluyen este paso.

Volver a la Guía
Inglés
Alemán

Traduciendo paso 1

Paso 1
LG V20 Front Facing Camera Replacement: paso 0, imagen 1 de 2 LG V20 Front Facing Camera Replacement: paso 0, imagen 2 de 2

  • Use the flat end of a spudger to disconnect the front camera flex cable.

  • If you want to go on and remove the motherboard assembly, there is no need to remove the front facing camera after disconnecting it. However if you feel uncertain, carefully remove it with a pair of tweezers.

  • Use a pair of tweezers to carefully remove the front facing camera. Be careful to only grip the body of the camera, as the top is the sensor pcb and is only held on with glue (removal will ruin the sensor).

Trenne das Flachbandkabel der Frontkamera mit dem flachen Ende eines Spudgers ab.

Es ist nicht nötig die Frontkamera nach dem Abtrennen des Kabels auszubauen, falls du weitermachen und das Motherboard entfernen möchtest. Wenn du dich aber unsicher fühlst, kannst du die Frontkamera mit einer Pinzette entfernen.

Entferne die Frontkamera vorsichtig mithilfe einer Pinzette. Achte darauf, das Gehäuse der Kamera zu fassen, da obendrauf der Sensor sitzt und nur festgeklebt ist (wenn du ihn abziehst, machst du den Sensor kaputt).

[* black] Use the flat end of a spudger to disconnect the front camera flex cable.
- [* icon_note] If you want to go on and remove the motherboard assembly, there is no need to remove the front facing camera after disconnecting it. However if you feel uncertain, carefully remove it with a pair of tweezers.
+ [* icon_note] If you want to go on and remove the motherboard assembly, there is no need to remove the front facing camera after disconnecting it. However if you feel uncertain, carefully remove it with a pair of [product|IF145-020|tweezers].
[* black] Use a pair of tweezers to carefully remove the front facing camera. Be careful to only grip the body of the camera, as the top is the sensor pcb and is only held on with glue (removal will ruin the sensor).

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.