Saltar al contenido principal

Aviso: Estás editando un prerrequisito para la guía que estabas viendo hace poco. Cualquier cambio que realices afectará todas las 6 guías que incluyan este paso.

Inglés
Español
Paso 6
With the adhesive cut, slowly lift the display up from the top (the side with the speaker-grille cutout), carefully flip it over vertically toward the bottom of the device, and rest it on its face, as shown. Do not attempt to completely remove the display yet, as it is still connected by a fragile ribbon cable. Be careful to not to strain the cable while positioning the display. Do not attempt to completely remove the display yet, as it is still connected by a fragile ribbon cable. Be careful to not to strain the cable while positioning the display.
  • With the adhesive cut, slowly lift the display up from the top (the side with the speaker-grille cutout), carefully flip it over vertically toward the bottom of the device, and rest it on its face, as shown.

  • Do not attempt to completely remove the display yet, as it is still connected by a fragile ribbon cable. Be careful to not to strain the cable while positioning the display.

Con el corte adhesivo, levanta lentamente la pantalla desde la parte superior (el lado con el recorte de la rejilla del altavoz), gírala cuidadosamente verticalmente hacia la parte inferior del dispositivo y colócala sobre su cara, como se muestra.

No intentes quitar completamente la pantalla todavía, ya que todavía está conectada por un cable plano frágil. Ten cuidado de no tensar el cable mientras colocas la pantalla.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.