Saltar al contenido principal

Google Pixelミッドフレームの交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés
Japonés
Paso 4
Google Pixel Midframe Replacement: paso 0, imagen 1 de 3 Google Pixel Midframe Replacement: paso 0, imagen 2 de 3 Google Pixel Midframe Replacement: paso 0, imagen 3 de 3
  • Slide the opening pick up both sides of the device in the small space between the midframe and the rear case to release the clips holding it in place.

  • Note that the clips are not released by sliding through them, but rather the inward pressure the opening pick creates as it enters the gap around them.

  • If the clasps fail to come undone, try pushing the edge you're working on inward with your hand, or using a thicker tool like a spudger.

  • Do not attempt to remove the midframe yet! There is still a fragile ribbon cable underneath connecting the earpiece speaker to the motherboard.

固定しているクリップを外すため、リアケースとミッドフレームの間の小さな隙間に、開口ピックを差し込み、デバイスの両側をスライドします。

この作業のスライドすることでクリップを外すことはできませんが、開口ピックが与える内向きのプレッシャーによって、スライドによる隙間が生じてきます。

クリップが外れない場合は、作業をしているエッジを手や、スパッジャーのようなツールで内側に押してみてください。

まだミッドフレームを外さないでください。この下に、ダメージが入りやすいリボンケーブルが付いており、マザーボードとイヤホンスピーカーを繋いでいます。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.