Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Remove the following 4 screws:
-
One 3 mm Phillips in the channel between the optical drive and fan.
-
Two 6 mm Phillips from the upper and bottom end of the drive bezel.
-
One 6 mm Phillips with a collar from bracket extending from the lower left corner of the drive.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.