Saltar al contenido principal

iPhone 7 배터리 교체

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Coreano
Paso 3
iPhone 7 Battery Replacement: paso 0, imagen 1 de 3 iPhone 7 Battery Replacement: paso 0, imagen 2 de 3 iPhone 7 Battery Replacement: paso 0, imagen 3 de 3
  • If this is your first time removing an iPhone battery adhesive strip, refer to the video in the following step before beginning.

  • Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.

  • Slowly pull one battery adhesive tab away from the battery, toward the bottom of the iPhone.

  • Pull steadily, maintaining constant tension on the strip until it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.

  • The strip will stretch to many times its original length. Continue pulling and re-grab the strip near the battery if necessary.

iPhone 배터리 접착 스트립을 처음 떼내는 경우, 시작하기 전에 다음 단계에 포함된 비디오를 참조하세요.

이 절차를 수행하는 동안 스트립을 평평하고 주름없는 상태로 유지하세요; 주름진 스트립은 깨끗하게 잡아 당겨지지 않고 서로 달라 붙어 파손됩니다.

배터리 접착 탭 하나를 배터리로 부터 iPhone 하단으로 천천히 잡아 당기세요.

배터리와 후면 케이스 사이에서 스트립이 빠질 때까지 스트립을 일정한 힘으로 꾸준히 당기세요. 최상의 결과를 얻으려면 스트립을 60º 이하로 당기세요.

스트립은 원래 길이의 몇 배로 늘어납니다. 필요하다면 스트립을 잡아당기면서 늘어난 스트립을 배터리에 가깝게 다시 잡고 당겨주세요.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.