Repara tus cosas Comunidad Tienda

Installation du lecteur optique du MacBook Pro 15" Unibody début 2011

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 15 guías que incluyen este paso.

Volver a la Guía
Inglés
Francés
Paso 4
MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement: paso 0, imagen 1 de 2 MacBook Pro 15" Unibody Early 2011 Optical Drive Replacement: paso 0, imagen 2 de 2

  • Remove following two screws:

  • Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments before proceeding.

  • One 8.6 mm Phillips screw

  • One 3.9 mm Phillips screw

  • Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.

Retirez les deux vis suivantes :

Soyez prudents ! La tête de ces vis est très fragile. Exercez une pression suffisante lorsque vous dévissez. Lisez les commentaires avant de procéder.

Une vis Phillips 8,6 mm.

Une vis Phillips 3,9 mm.

Avec précaution, faites pivoter la carte AirPort/Bluetooth (avec les câbles AirPort/d'antenne toujours connectés) hors du boîtier inférieur

[* black] Remove following two screws:
- [* icon_caution] Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments on the right before proceeding.
+ [* icon_caution] Take care, as these screws are unusually easy to strip. Apply firm pressure while unscrewing. Read comments before proceeding.
[* red] One 8.6 mm Phillips screw
[* orange] One 3.9 mm Phillips screw
[* black] Carefully rotate the AirPort/Bluetooth board housing (with AirPort/Antenna cables still attached) out of the lower case.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.