Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 16
Paso 16
-
Remove the 3.5mm Phillips screw from the grey tab on the top of the camera with a Philips Head screwdriver.
-
Rotate the camera so the back panel is facing you.
-
Remove the 1.4mm Phillips screw from the sliver tab near the top of the camera with a Philips Head screwdriver.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.