Saltar al contenido principal
Inglés
Italiano
Paso 3
Grab the metal frame with the flash assembly that was removed from around the lens assembly. Remove the 2 mm screw on the circuit board using a Phillips #00 screwdriver.
  • Grab the metal frame with the flash assembly that was removed from around the lens assembly.

  • Remove the 2 mm screw on the circuit board using a Phillips #00 screwdriver.

  • Lift and remove the circuit board from the flash assembly.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.