Saltar al contenido principal

Aviso: Estás editando una guía de prerrequisito. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.

Inglés
Español

Traduciendo paso 1

Paso 1
Before prying up on the cover, you may have to first remove a screw located inside the battery compartment (M2X3) and release the two latches. If you don't release the latches, you may snap the cover.
  • Before prying up on the cover, you may have to first remove a screw located inside the battery compartment (M2X3) and release the two latches. If you don't release the latches, you may snap the cover.

  • Pry up the top of the cover first by using a spudger to wedge in between the cover and base of the computer.

  • Once the spudger is between the cover and the base of the computer, wedge underneath the remaining border surrounding the keyboard.

  • Cracking sounds are normal. Be careful and take your time removing this panel.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.