How to refurbish and clean longboard bushings

Inglés

Español

Traduciendo paso 2

Paso 2

Take apart the trucks by removing the parts in this order: washer #1, bushing #1, metal hangar, bushing #2, washer #2
To remove the hanger, wiggle it off of the kingpin (large bolt), then lift it out of the pivot cup.
Make sure you remember the order of the parts! Take a picture if you need to, or simply refer to the other side of the board for the correct truck setup.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.