Saltar al contenido principal

¿Cómo reparar un ventilador de mesa ruidoso?

Inglés
Español
Paso 2
How to Fix a Noisy Table Fan: paso 0, imagen 1 de 3 How to Fix a Noisy Table Fan: paso 0, imagen 2 de 3 How to Fix a Noisy Table Fan: paso 0, imagen 3 de 3
  • Remove the clamps surrounding the protective cage by pulling each outward (away from the fan) one at a time.

  • Though this may require some force, don't pull on the clamps too hard, as they can be easily broken.

  • As you are removing the last few clamps, be sure to hold the cage with another hand. Otherwise, it will fall right off!

  • Once the front end of the cage is free, remove it from the fan and place it to the side for now.

Quita los seguros que mantienen la jaula de metal en su lugar. Tira de ellos hacia afuera (en dirección opuesta del ventilador) uno por uno.

Aunque esta acción requiere cierto nivel de fuerza, ten mucho cuidado de no poner mucha presión, ya que los seguros se pueden romper fácilmente.

Cuando queden menos de tres seguros, recuerda sostener la jaula con la otra mano, o si no se le va a caer.

Una vez que la jaula quede libre, quítala cuidadosamente y colócala a un lado.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.