Canon PowerShot SX260 HS Flash Assembly Replacement

Volver a la Guía

Inglés

Español

Traduciendo paso 10

Paso 10

Canon PowerShot SX260 HS Flash Assembly Replacement: paso 0, imagen 1 de 2

Canon PowerShot SX260 HS Flash Assembly Replacement: paso 0, imagen 2 de 2

Gently remove the ribbon cable assembly from the top of the camera with your tweezers.
This cable is a long piece that runs across the top of the camera.
The flash assembly is connected to this cable.
Once removed gently lift out of the camera
Replace the ribbon cable with the attached flash assembly.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.