Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 3 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Remove the single philips #00 screw on the button pad which are 2.2mm long. This screw is circled in red in the guide image.
-
Next, remove the two 2.4mm long screws located in between the LCD screen and the touch pad. These screws will require a Phillips #00 screwdriver.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.