Repara tus cosas Comunidad Tienda

Beats Pill 1.0 Lautsprecher austauschen

Volver a la Guía
Inglés
Alemán
Paso anterior

Traduciendo paso 2

Paso 2
Beats Pill 1.0 Speaker Replacement: paso 0, imagen 1 de 1

  • Each speaker is held down by two clips. On the front face of the speaker, push the speaker outward while pushing one of the clips that holds it down to the side. Repeat this on the other speaker and clip. The speakers should pop out.

Jeder Lautsprecher wird von zwei Klammern festgehalten. Drücke den Lautsprecher von der Vorderseite her nach außen und gleichzeitig eine der Halteklammern zur Seite. Der Lautsprecher sollte dann herauskommen.

-[* black] Each speaker is held down by two clips. On the front face of the speaker, push the speaker outward while pushing one of the clips that holds it down to the side. The speaker should pop out
+[* red] Each speaker is held down by two clips. On the front face of the speaker, push the speaker outward while pushing one of the clips that holds it down to the side. Repeat this on the other speaker and clip. The speakers should pop out.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.