Repara tus cosas Comunidad Tienda

iPad Mini 3 Wi-Fi 液晶显示板更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 48 guías que incluyen este paso.

Volver a la Guía
Inglés
Chino
Paso 24
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: paso 0, imagen 1 de 2 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: paso 0, imagen 2 de 2

  • Be very careful with this step. Take your time and ensure the adhesive is hot and soft, and that you've been through all of the adhesive with an opening pick. Don't be afraid to stop and reheat.

  • At the top of the iPad opposite the home button, you should have a pick lodged into each corner. Twist the picks to lift the glass slightly, separating the last of the adhesive along all four edges.

  • If you encounter a significant amount of resistance, stop twisting. Leave the picks in place, reheat, and reapply the iOpener to the problem areas, and run a pick through the sticking point one more time.

小心操作这一步，花点时间保证粘合剂是热和软的，同时确保您的撬片已经分离开了该分离的粘合剂。 不要怕返工和重新加热。

在iPadHome键相对的顶部您应该在每个角落里插了撬片。 扭动撬片，轻轻地提起玻璃面板，分离最后残留的粘合剂。

如果在打开过程中遇到很大的阻力，请立即停止扭动撬片。 将撬片放置原位，重新加热iOpener，将其放置在难以开启的位置，然后插入撬片来重新分离一遍粘合剂。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.