Saltar al contenido principal

iPad Mini 3 Wi-Fi LCDシールドプレート交換

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 48 guías que incluyen este paso.

Inglés
Japonés
Paso 9
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: paso 0, imagen 1 de 1
  • Reheat the iOpener and place it on the top edge of the iPad, over the front-facing camera.

  • Be careful not to overheat the iOpener during the repair procedure. Wait at least ten minutes before reheating the iOpener.

  • If you have a flexible iOpener, you can bend it to heat both the upper left corner and the upper edge at the same time.

iOpenerを再び温め、iPadの上部端、フロントカメラ上に載せます。

修理作業中、 iOpenerを温めすぎないようにご注意ください。前回の作業から10分間は開けてから iOpenerを再度温めます。

形を自由に変化できるiOpenerをお持ちの場合は、画像のように上部左端コーナーと上部先端を同時に温めるよう曲げてください。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.