iPad Mini 3 Wi-Fi LCD Shield Plate Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 48 guías que incluyen este paso.

Inglés

Coreano

Traduciendo paso 4

Paso 4

While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.
Don't insert the opening pick any deeper than the black bezel on the side of the display. Inserting the pick too far may damage the LCD.
Pull the suction cup's plastic nub to release the vacuum seal and remove the suction cup from the display assembly.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.