Saltar al contenido principal

Aviso: Estás editando un prerrequisito para la guía que estabas viendo hace poco. Cualquier cambio que realices afectará todas las 3 guías que incluyan este paso.

Inglés
Español
Paso 4
The rubber membrane surrounding the home button is very thin and tears easily. Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button membrane.
  • The rubber membrane surrounding the home button is very thin and tears easily.

  • Apply mild heat (with an iOpener, heat gun, or hair dryer) to soften the adhesive securing the home button membrane.

  • Using your fingertip, apply firm, constant pressure on the home button from the front side of the display assembly, until the membrane starts to separate from the front panel.

  • Do not push the home button all the way through—you only need to get a corner free so that you can pry it free with a spudger.

Cuidadosamente empuja la esquina superior izquierda del boton de inicio hacia arriba del panel frontal.

No empujes el boton de inicio completamente afuera—solo necesitas liberar una esquina para que puedas separarlo con un spudger.

Esta membrana es muy delgada. Si sientes como que vas a romper el botón, aplica un poco de calor (con un iOpener, pistola de aire caliente, o una secadora de pelo) y intenta otra vez.

[* icon_caution] The rubber membrane surrounding the home button is very thin and tears easily.
[*
black] Gently pushApply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the top left corner ofadhesive securing the home button up awaymembrane.
[* black] Using your fingertip, apply firm, constant pressure on the home button from the front side of the display assembly, until the membrane starts to separate
from the front panel.
[* icon_caution] The rubber membrane surrounding the home button is very thin and tears easily.
[*
black] Gently pushApply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) to soften the top left corner ofadhesive securing the home button up awaymembrane.
[* black] Using your fingertip, apply firm, constant pressure on the home button from the front side of the display assembly, until the membrane starts to separate
from the front panel.
[* icon_caution] Do not push the home button all the way through—you only need to get a corner free so that you can pry it free with a spudger.
[* icon_note] This membrane is very thin. If you feel like you're going to tear the button, apply mild heat (with an [product|IF145-198-2|iOpener], heat gun, or hair dryer) and try again.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.