iPod Nano 5th Generation Glass Panel Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.

Inglés

Chino

Traduciendo paso 5

Paso 5

The glass panel is held in place by adhesive on all four sides. In the following steps, work carefully to avoid cracking the glass.
Insert an iPod opening tool between the display and the glass panel at the top of the device.
Rotate the iPod opening tool towards the rear of the device, slightly lifting the top of the glass out of the outer case.
The glass panel does not raise very far. Do not attempt to completely remove the panel yet, or you are likely to break the display screen.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.