Saltar al contenido principal

Remplacement du câble principal du Apple Studio Display M2454

Inglés
Francés

Traduciendo paso 1

Paso 1
Apple Studio Display M2454 Main Computer Cable Replacement: paso 0, imagen 1 de 1
  • First, the back panel needs to be removed to access the cable connectors.

  • Locate the three 2mm hex screws located on the top of the stand and remove them.

  • Now locate and remove the four 2mm hex screws on the corners of the back panel.

  • Now remove the back panels while pulling the cable through them without damaging either part.

Tout d’abord, le panneau arrière doit être retiré pour accéder aux connecteurs de câble.

Repérez les trois vis à tête hexagonale de 2 mm situées en haut du support et retirez-les.

Maintenant, localisez et retirez les quatre vis à tête hexagonale de 2 mm situées aux coins du panneau arrière.

Retirez maintenant les panneaux arrière tout en tirant le câble sans endommager aucune partie.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.