Saltar al contenido principal

iPhone 5s 顶部排线更换

Inglés
Chino

Información de Guía

= Hecho = Incompleto
    Use this guide to replace the upper component cable containing the flash, microphone, and sleep/power button cable of an iPhone 5s.
    This guide requires removing the battery. Removing the battery with the adhesive strips is the safest method, but also leaves your battery without adhesive. When replacing your battery, use a piece of double-sided tape to secure it. The battery is pretty tightly secured in the device, but the tape will keep it from rattling.
    '''You can also use this guide to replace the [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57896|logic board antenna bracket] and [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57898|contact clip].'''
    [video|https://www.youtube.com/watch?v=cJUKOvFQUWU]

      Pasos de la guía

      Paso 1

      松开把音量键和静音键固定在左侧边框上的螺丝:

      Paso 2

      用撬棒把静音键从左侧边框拨出。

      Paso 3

      用撬棒把左侧边框上的音量键拨出。

      Paso 4

      用镊子取出把后置摄像头固定在后盖的胶片垫。

      Paso 5

      松开把逻辑主板天线支架固定在后盖上的1.3mm飞利浦#000号螺丝。

      Paso 6

      取出逻辑主板上的天线支架。

      Paso 7

      松开固定链接片和电源键支架的2.1mm飞利浦#000号螺丝。

      Paso 8

      从机身中取出链接片。

      Paso 9

      将平口撬棒插入顶部排线下方滑动使其与后盖分离。

      Paso 10

      滑动平口撬棒在靠近音量键的排线下方。

      Paso 11

      用撬棒的尖头挑起前置排线与振子接触点固定在后盖上的胶贴。

      Paso 12

      用撬棒的尖头把扬声器排线从后盖上分离出来。

      Paso 13

      用镊子从后盖上取出电源键固定支架。

      Paso 14

      用撬棒尖头把电源键向机身内侧拨动。

      Paso 15

      取出把电源键固定机身中的卡扣。

      Paso 16

      从机身中取出顶部排线。

      Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.