Saltar al contenido principal

Reemplazo de la placa madre y el disipador de calor

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará la guía que incluye este paso.

Inglés
Español
Paso 2
Xbox Series X Motherboard Removal (Motherboard): paso 0, imagen 1 de 3 Xbox Series X Motherboard Removal (Motherboard): paso 0, imagen 2 de 3 Xbox Series X Motherboard Removal (Motherboard): paso 0, imagen 3 de 3
  • Pinch the locking tab on the interconnect cable on the motherboard and use the flat end of a spudger to disengage the clip.

  • Use your fingers to pull the connector straight up and out of its socket.

  • During reassembly, insert the #1—SOC side of interconnect cable connector into its socket so the locking tab is facing outward. Then, press down on the edges of the connector until it snaps into place.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.