Saltar al contenido principal

Center Chassis Removal (Power Supply Attached)

Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 5 guías que incluyen este paso.

Inglés
Español
Paso 2
Center Chassis Removal (Power Supply Attached): paso 0, imagen 1 de 3 Center Chassis Removal (Power Supply Attached): paso 0, imagen 2 de 3 Center Chassis Removal (Power Supply Attached): paso 0, imagen 3 de 3
  • Grip the base of the interconnect cable connector with your fingers.

  • Depress each side of the connector to unlock the cable locking tabs.

  • With the locking tabs depressed, grip the edges of the interconnect cable and pull it straight out of the connector to disconnect it.

  • With the locking tabs depressed correctly, the interconnect cable will slide out with very little force.

  • During reassembly, the interconnect cable should "snap" into place when fully inserted.

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.