Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 4 guías que incluyen este paso.
Traduciendo paso 4
Paso 4
Remove the USB enclosure
-
Use your fingers to slide the USB board enclosure out from under the metal clip securing it to the shell.
-
Remove the enclosure.
-
Make sure the Pair button is properly oriented and fully inserted in its slot.
-
Firmly slide the enclosure into position until it snaps into place under the metal clip.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.