Saltar al contenido principal

Shield Plate and Rubber Strap Removal

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Coreano
Paso 7
Shield Plate and Rubber Strap Removal, Remove the corner cover: paso 0, imagen 1 de 1
Remove the corner cover
  • Use a T8 Torx driver to remove the 8.8 mm screw securing the power supply corner cover.

Insertar traducción aquí

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.