Saltar al contenido principal

シールドプレートとゴムストラップの外し方

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Japonés
Paso 3
Shield Plate and Rubber Strap Removal, Remove the power cable port: paso 0, imagen 1 de 1
Remove the power cable port
  • Use a T8 Torx driver to remove the three screws securing the power cable port to the chassis:

  • Two 13.1 mm screws

  • One 35 mm screw

T8トルクスドライバーを使って、シャーシに電源ケーブルポートを固定しているネジを3本外します。

13.1mmネジー2本

35mmネジー1本

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.