Saltar al contenido principal

Sostituzione alimentatore Xbox Series X

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés
Italiano
Paso 3
Shield Plate and Rubber Strap Removal, Remove the power cable port: paso 0, imagen 1 de 1
Remove the power cable port
  • Use a T8 Torx driver to remove the three screws securing the power cable port to the chassis:

  • Two 13.1 mm screws

  • One 35 mm screw

Usa un cacciavite Torx T8 peer svitare le tre viti che fissano la porta del cavo di alimentazione alla struttura:

Due viti da 13,1 mm

Una vite da 35 mm

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.