Xbox Series X 风扇更换

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 21 guías que incluyen este paso.

Inglés

Chino

Traduciendo paso 3

Paso 3

Remove the fan

Slide the fan out of its slot to remove it.
During reassembly:
Before installing the fan, make sure it's clean! Use a dust blower or compressed air to blow off any dust or debris, and wipe the fan clean with a clean cloth.
Use a finger to keep the fan blades steady—it makes them easier to clean.
Note that the fan can only be installed one way—make sure Master Chief is facing you.

	[title] Remove the fan
	[* black] Slide the fan out of its slot to remove it.
-	[* icon_reminder] During reinstallation, note that the fan can only be installed one way—make sure [link\|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full\|Master Chief\|new_window=true] is facing you.
-	[* icon_note] If you're replacing the fan, a new fan might not include the plastic installation bracket, which is attached to the fan with four T10 Torx screws. This isn't pictured in this guide.
+	[* icon_reminder] During reassembly:
+	[* black] Before installing the fan, make sure it's clean! Use a [product\|IF145-064-2\|dust blower\|new_window=true] or compressed air to blow off any dust or debris, and wipe the fan clean with a clean cloth.
+	[* icon_note] Use a finger to keep the fan blades steady—it makes them easier to clean.
+	[* black] Note that the fan can only be installed one way—make sure [link\|https://d3nevzfk7ii3be.cloudfront.net/igi/hZQNu3JSXQ4MaVXE.full\|Master Chief\|new_window=true] is facing you.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.