Aviso: Ahora estás editando un requisito previo de la guía que estabas viendo. Cualquier cambio que realices afectará a todas las 2 guías que incluyen este paso.
Traduciendo paso 1
Paso 1
-
Remove the screws holding the cables into the distribution board with a Phillips #2 screwdriver.
-
Remove the 2 cables that connect the heating coil to the distribution board on the top of the cooking chamber, there should be one blue and one white cable, both with a white shroud leading into the cooking chamber.
Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.