DualSense Edge Trigger Assembly Replacement

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 9 guías que incluyen este paso.

Inglés

Español

Traduciendo paso 1

Paso 1

Move the vibration motor cable

This procedure is written using the R2 trigger assembly, which is on your left. The procedure to remove the L2 assembly is identical.
Use a pair of tweezers to disconnect the vibration motor cable by lifting the JST connector out of its socket.
This cable is connected to the back button board, between the RB or LB button and the vibration motor.
Continue lifting until the vibration motor cable is free of the clip on the trigger assembly.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.