Saltar al contenido principal

DualSense Edge rückseitige Zierblende tauschen

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 15 guías que incluyen este paso.

Inglés
Alemán
Paso 2
DualSense Edge Rear Trim Replacement, Release the clips: paso 0, imagen 1 de 2 DualSense Edge Rear Trim Replacement, Release the clips: paso 0, imagen 2 de 2
Release the clips
  • Slide the pick around to the rear of the controller and flip the controller over so the buttons are facing down.

  • Slide the opening pick around the edge of the rear trim to release the clips.

Schiebe das Plektrum um die Rückseite des Controllers herum und drehe den Controller so, dass die Tasten nach unten zeigen.

Schiebe das Plektrum um die Kante der rückseitigen Zierblende entlang, bis sich die Clips lösen.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.