Saltar al contenido principal

Changement coque arrière HMD Skyline

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 21 guías que incluyen este paso.

Inglés
Francés

Traduciendo paso 1

Paso 1
HMD Skyline Back Cover Replacement, Separate the back cover: paso 0, imagen 1 de 3 HMD Skyline Back Cover Replacement, Separate the back cover: paso 0, imagen 2 de 3 HMD Skyline Back Cover Replacement, Separate the back cover: paso 0, imagen 3 de 3
Separate the back cover
  • A screw‑driven camshaft in the bottom left corner pushes the back cover away from the phone, creating a gap to begin separating the cover.

  • With the back cover facing up, use a T3 Torx screwdriver to turn the screw in the bottom edge counterclockwise until the back cover pops up.

Un arbre à cames à vis situé dans le coin inférieur gauche permet d'écarter la coque arrière du téléphone, créant ainsi un espace pour commencer à détacher la coque.

Avec la coque arrière orientée vers le haut, utilisez un tournevis Torx T3 pour tourner la vis du bord inférieur dans le sens inverse des aiguilles d'une montre jusqu'à ce que la coque arrière se soulève.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.