Repara tus cosas Comunidad Tienda

Kobo Clara Colour 배터리 교체

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 6 guías que incluyen este paso.

Volver a la Guía
Inglés
Coreano
Paso 2
Kobo Clara Colour Battery Replacement, Remove the stretch release adhesive: paso 0, imagen 1 de 3 Kobo Clara Colour Battery Replacement, Remove the stretch release adhesive: paso 0, imagen 2 de 3 Kobo Clara Colour Battery Replacement, Remove the stretch release adhesive: paso 0, imagen 3 de 3
Remove the stretch release adhesive

  • The next two steps show how to remove a battery that's secured by stretch release adhesive.

  • Use tweezers to pull on the battery adhesive strip's pull tab until you can grip it with your fingers.

  • While holding the battery in place, pull the strip out slowly and steadily at a low angle. Give it plenty of time to stretch and un-stick from under the battery.

  • You can also wrap the adhesive strip around a spudger and "roll" it for a more consistent pull.

  • If the adhesive strip breaks off, try to retrieve it using your fingers and continue pulling—but don’t pry under the battery.

  • If you can't retrieve a strip, don't worry! Remove as much adhesive as possible and skip down two steps for an alternate method.

스트레치 릴리스 접착제 제거하기

핀셋을 사용하여 손가락으로 잡을 수 있을 때까지 배터리 접착 스트립의 당김 탭을 당깁니다.

배터리를 제자리에 고정시킨 상태에서 낮은 각도로 천천히 그리고 일정하게 스트립을 당겨 빼세요. 배터리 밑에서 늘어나고 떨어질 때까지 충분한 시간을 주세요.

접착 스트립을 스퍼저에 감고 "말아서" 당기면 더 일관되게 당길 수 있습니다.

접착 스트립이 끊어지면 손가락으로 다시 잡고 계속 당기되, 배터리 밑을 비집지 마세요.

스트립을 회수할 수 없더라도 걱정하지 마세요! 가능한 한 많은 접착제를 제거하고 두 단계를 건너뛰고 대안을 시도하세요.

[title] Remove the stretch release adhesive
+[* icon_note] The next two steps show how to remove a battery that's secured by stretch release adhesive.
[* black] Use [product|IF145-020|tweezers] to pull on the battery adhesive strip's pull tab until you can grip it with your fingers.
[* black] While holding the battery in place, pull the strip out slowly and steadily at a low angle. Give it plenty of time to stretch and un-stick from under the battery.
[* icon_note] You can also wrap the adhesive strip around a spudger and "roll" it for a more consistent pull.
[* black] If the adhesive strip breaks off, try to retrieve it using your fingers and continue pulling—but don’t pry under the battery.
[* icon_note] If you can't retrieve a strip, don't worry! Remove as much adhesive as possible and skip down two steps for an alternate method.

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.