Repara tus cosas Comunidad Tienda

电池断电

Aviso: Estás editando una guía de requisitos previos. Cualquier cambio que realices afectará a todas las 12 guías que incluyen este paso.

Volver a la Guía
Inglés
Chino
Paso anterior

Traduciendo paso 5

Paso 5
Battery Disconnection, Disconnect the battery: paso 0, imagen 1 de 2 Battery Disconnection, Disconnect the battery: paso 0, imagen 2 de 2
Disconnect the battery

  • Insert the point of a spudger under the edge of the battery connector head opposite of the cable.

  • There's a surface-mounted component close to the connector. Be careful not to touch it with your spudger!

  • Lift up the connector with the spudger to separate the rest of the coating and disconnect the battery.

  • During reassembly:

  • Inspect the connector head and its socket for any remaining coating that could prevent a good connection.

  • Peel off the coating, heating the area when the coating becomes too brittle.

  • It doesn't have to look pretty! You just need to remove enough coating so the connector head sits properly in its socket.

断开电池连接

将撬棒的尖头插入排线对面的电池接口边缘下。

接口附近有一个 固定在表面的固件请勿用撬棒碰它！

用撬棒提起接口，分离其余涂层，然后断开电池连接。

在重新组装过程中：

检查接头及其插座是否有任何残留涂层，以免妨碍连接。

剥离涂层，当涂层变得太脆时加热该区域。

不用力求完美！您只需去除足够的涂层，使接头能正确地插入插座中。

Tus contribuciones son autorizadas bajo la licencia de código abierto de Creative Commons.